Recent Activities
GN Solids Control
[email protected]
Tel:+86-316-5276989 (China)
Tel:+1-713-8780880 (USA)
www.gnsolidsamerica.com
Recent Activities
Home > Recent Activities
GN Solids Control will attend MIOGE 2015 Oil Show
2015-06-15 14:29:56

13th biennial Moscow International Oil & Gas Exhibition (MIOGE 2015) will be held on 23 - 26 June 2015 at the Epicenter in Moscow, Russia. MIOGE is the largest and best-attended oil and gas trade event in Russia and Central Asia. Over 20,000 local and international visitors attended the previous edition.

As China leading equipment manufacturer for solids control & drilling waste management, GN Solids Control will attend MIOGE 2015 with advanced technology equipment: decanter centrifuge & vertical cuttings dryer.

MIOGE 2015 Oil Show:

Address: Expocentre in Moscow, Russia
Time: 23 - 26 June 2015
GN Solids Control booth No.: H227, Pavilion 8, Hall 2 
Appointment Email: [email protected]

gn solids control MIOGE 2015

1) Drilling mud Decanter centrifuge: GNLW363CG

 

  • Centrifuge type: fixed speed (3200rpm/2700rpm/2200rpm) & international high standard centrifuge
  • 14 inch big bowl centrifuge; the bowl length is 50inch
  • Typical bowl speed can be 3200rpm. G Force [email protected]
  • Centrifuge max. Capacity is 30 m3/h hydraulic water test; In respect of drilling mud, the working capacity can be 15 m3/h to 20m3/h, some opening the conveyor to increase the capacity of the centrifuge. 
  • Power consumption: 37kw + 11kw, motor drive with belt

 

The centrifuge application including, but not limited to:

  • Solids Control barite recovery, G [email protected], bowl speed around 2000rpm;
  • Solids control mud weight reduction, G [email protected], bowl speed around 2500rpm;
  • Drilling waste management low gravity solids separation, G [email protected] 1800-2300, bowl speed around 3200rpm;

GN centrifuge MIOGE 2015

2) Drilling waste management vertical cuttings dryer: GNCD730D

 

  • Vertical cuttings dryer type: fixed speed (900rpm /1200rpm /1500rpm) & international high standard cuttings dryer
  • 730mm in screen basket diameter (max.)
  • Typical speed can be 900rpm /1200rpm /1500rpm
  • Cuttings dryer treating capacity (max.) can be 30 -50tons/h with screen basket opening 0.35mm/0.5mm
  • Drying efficiency oil on cuttings (OOC) ≤5%
  • Vertical cuttings dryer energy consumption: 37kw + 0.55kw, motor drive with belt

Vertical cuttings dryer application: this equipment generally used for drying treatment of cuttings from shale shaker, desander, desilter or mud cleaner ( combintation of desander & desilter). Centrifuge discharge waste solids cannot be put into vertical cuttings dryer for drying treatment. 

gn vertical cuttings dryer MIOGE 2015