News
GN Solids Control
[email protected]
Tel:+86-316-5276989 (China)
Tel:+1-713-8780880 (USA)
www.gnsolidsamerica.com
News
Home > News
Big Bowl Dewatering Centrifuge is Working Well in Singapore
2018-03-21 11:47:43

Save space, save money, save manpower, save hassle; be flexible. Well that is what we do. This is a customized design, when client visit us, we put the requirement onto draft drawings, stacked container, and a hooked ladder, sliding screw dischage, and plug & play control.

\
After being sent to the site, GN have arranged engineer to site for commissioning, and now it is quite well working, with fluid result and discharged solids upto expectation.
Before feeding the mud into the centrifuge, normally a de-sanding unit will be needed to remove the coarse solids in the mud to protect the decanter centrifuge unit. This dewatering system running in Singapore has automatic lubrication function on the centrifuge unit which will protect the bearing of the centrifuge for longtime working and less shut down for maintenance. The screw conveyor installed in the container has slid runner. Thus the conveyor can slid out of the container for discharging the sludge and slid back into the container for transportation convenience.
GN’s dewatering centrifuge system can be used in separating the ultra-fine solids from drilling mud, waste water and so on. In tunneling project, the dewatering unit is used to remove the large content solids from drilling mud to make the water recyclable as always most of the tunneling site in city has limited area to put the waste mud collection container. A high efficiency dewatering system can greatly save the cost on water consumption and increase the boring speed.
GN Solids Control have been into the civil waste slurry treatment for many years, and been familiar with the process, result etc..Freely to contact us if any questions.