GN Solids Control
[email protected]
Tel:+86-316-5276989 (China)
Tel:+1-713-8780880 (USA)
Home > News
Vacuum Pump is now Transfering Confidence
2018-04-10 12:37:12
With the testing video, the vacuum pump showed in CIPPE GN booth caught a lot of attention. Everyone is amazed by the flexibility of transfering different material, from stone to water efficiently. Well yes, the high viscosity material is not included, if that is the situation, normally what we need to do is lower down the viscosity first, it does not actually matter if you use vacuum pump, or by another way, you need make it flowable. 
Here comes the test video:
Waste drilling cutting transferring is one of main application of the vacuum pump. The drilling cutting discharged from primary shale shaker, cyclone unit and decanter centrifuge is with high solids content, which makes the cuttings difficult to be transferred to the cuttings dryer unit for further treatment. The vacuum pump can transfer the material with solids content larger than 80 percent. The high transferring efficiency prevents to collect the waste cutting firstly into a mud pit, which make the closed loop mud system a reality. 
The oily sludge coming from refinery waste, crude oil tank bottom residual and barge vessel cleaning is still with large quantity oil remaining in it. To recover the oil in the sludge, firstly the operators need to transfer the sludge to the oil slurry treatment system. Air operation can firstly produce vacuum inside the pump to suck the sludge from 50 meters out there and the discharge under positive pressure to far away 500-1000 meters. 
Besides, the vacuum pump can also be used in waste pit cleaning, frac tank and animal waste transferring. It is worthy to mention that the pump is fully air operation for hazardous area application. Due to none any rotating parts inside the cavity, the wearing is less for long working time.
The pump is so popular that we sold more than a dozzen just after the exhitibition. Some of them we have been in touch, and seeing is beliving, the real feel, video gives lot of confidence to all the clients.
It is more well known in offshore platform, but we have other clients now using it for more different projects. One of the client, use the pump transfer dredging slurry for 500mtrs; and lots of civil project engineers are trying to package into the site for eaiser slurry tranfer.
And it also helps more people build more confidence on GN products eventually all the products from China.