News
GN Solids Control
[email protected]
Tel:+86-316-5276989 (China)
Tel:+1-713-8780880 (USA)
www.gnsolidsamerica.com
News
Home > News
GNOST-05A Oil Sludge Treatment Plant for Asia Client
2019-07-14 08:23:32

GN oil sludge treatment plant is mainly used to recover the valuable oil in oily sludge so that recovered oil could produce more economic benefit. In the meanwhile, waste discharging would be greatly reduced. Recently, GN finished the fabrication of 1 set oil sludge treatment plant. The system now is under the final assembling and factory test procedure, later will shipped out of China. GN oil sludge treatment plant is mainly used to recover the valuable oil in oily sludge so that recovered oil could produce more economic benefit. In the meanwhile, waste discharging would be greatly reduced. Recently, GN finished the fabrication of 1 set oil sludge treatment plant. The system now is under the final assembling and factory test procedure, later will shipped out of China.

\

Then general working principle of the oil sludge treatment plant is 3-phase separation for oil, water and solids. Therefore, GN's system is mainly consisting of coarse solids separation, fine solids separation and oil water separation. 

GN shaker is used to remove the large particle of solids in the sludge. Before feeding to the shale shaker, operator needs to dilute the sludge to solids content less than 20% for easy pumping. GN has a sludge vacuum pump that is an ideal machine for transferring the sludge. The shaker unit is sitting on a tank that is to collect the liquid passing through the shaker screen. Agitators are installed in the tank to prevent the sedimentation of the solids.  

\

The solid bowl decanter centrifuge is used for fine solids separation. GN is able to provide solid bowl decanter of 9 inch to 30 inch. The feeding pump sucks the sludge from tank under the shaker, and then feed to the decanter. In the separation process, fine solids will be removed and liquid of oil and water mixture will be discharged out for further disc centrifuge treatment. 

GN uses the disc centrifuge for oil, water and very less solid separation. The disc centrifuge can run at a much higher speed so that oil and water can be separated. Per customers’ working condition and purpose, a chemical dosing unit is needed to help taking off the oil from solid. 

\

GN designed the oil sludge treatment plant with models of GNOST-01A, GNOST-05A and GNOST-15A for different capacity requirements. Please feel free to contact with GN for more info on the oil sludge treatment plant.