News
GN Solids Control
[email protected]
Tel:+86-316-5276989 (China)
Tel:+1-713-8780880 (USA)
www.gnsolidsamerica.com
News
Home > News
Offshore Drilling Mud Tank System Will be Ready for Shipment
2020-02-07 14:45:30

One set drilling mud tank system manufactured by GN for offshore has been trial assembled in factory, later will be shipped out to client's site. GN Solids Control is with rich experience in design and manufacturing the mud system no matter standard or customized specifications.

It is widely known that the offshore platform is with limited space to arrange the equipment, which requires the mud tank system need to be a compact design while with full functions for mud treatment. 

\

The offshore drilling mud tank system is a full function and self-contained design. It has all necessary equipment to process the drilling mud step by step. Per the different working principle, the impurities with different sizes in the drilling mud would be separated by different equipment. 

Equipment list of the Offshore Drilling Mud Tank System

  1. Shale shaker, with simple structure and adjustable vibrating G force, is used to remove the coarse cuttings in drilling fluids. GN connected the main shaker unit and the underflow drying shaker unit in mud cleaner to make larger capacity vibrating screen system, this reduced the footprint of the system, but ensures the flow rate.    
  2. This system has a centrifugal degasser that is used to remove the air invaded into the drilling mud. The degasser unit can effectively remove the air to ensure the property of the mud. This also guarantees the sufficient pressure of the sand pump in feeding the drilling mud to the cyclone unit of the mud cleaner. 
  3. Decanter centrifuge is used to remove the fine solids in the drilling mud. GN decanter has been proved with stable performance and easy operation procedures to meet the demand on drilling site. The material application in rotation part and protection design in wearing part greatly extends the working hours and reduces the maintenance cost.
  4. GN also equipped screw conveyer to collect the waste cutting discharged from above mentioned equipment. As on platform, collecting the drilling cutting is also an important job due to limited space.

\

For more information on offshore drilling mud tank system, please feel free to contact GN Solids Control.