News
GN Solids Control
[email protected]
Tel:+86-316-5276989 (China)
Tel:+1-713-8780880 (USA)
www.gnsolidsamerica.com
News
Home > News
The solid control system of the workover rig is sold to drilling company
2021-07-30 14:23:29

GN Solids Control has been committed to the design of mud treatment system and equipment manufacturing for many years. GN Solids Control has provided overall solutions for mud treatment systems for many well-known companies. Recently, GN Solids Control completed the production and supply of a mud treatment system for a workover rig for a Chinese drilling company.

 

The main equipment of the workover rig solids control system is as follows:

1. Shale Shaker

The motor of the GN Solids Control shale shaker is selected from Italy's OLI or the United States' Martin vibration motor, and the explosion-proof electric control uses Siemens Schneider electrical components, which greatly improves the service life. Use pre-tensioned screens that conform to the frame and are equipped with quick disassembly ratchet tools to facilitate the replacement of the screens. At the same time, it should be emphasized that the screens of the GN Solids Control shale shaker are also produced by GN Solids Control and have passed the US RP 13C certification. The shale shaker is mainly used to separate solid particles above 100um.

 

2. GN desander

The desander produced by GN Solids Control is mainly divided into two types: one is a mini type. This desander has the characteristics of small structure and economical benefits. It is mainly used in small oil drilling and repairing rigs, coalbed methane drilling, and horizontal directional crossing. Drilling rigs and so on. The other is a desander with a large underflow screen, which has the characteristics of large processing capacity and drier processing of drill cuttings. It is mainly used for large oil drilling rigs, shield engineering, river dredging projects, etc. GN desander is mainly used to separate solid particles above 40-60um.

\

3. GN jet mixing device

The jet mixing device is mainly composed of a jet mixing funnel, a sand pump and a skid, which is used to add bentonite, etc. and mix the slurry that has lost its specific gravity to obtain new usable slurry.

 

4.GN Mud Agitator

The mud agitator is usually placed on the mud tank to agitate the mud in the tank to prevent the mud from settling. Usually, a mud agitator is used every 3 meters. GN mud agitator can be made into single impeller, double impeller and three impeller to meet customer needs.

 

5. GN mud gun

To prevent mud from accumulating and depositing in the corners of the mud tank, GN Solids Control is equipped with a mud gun in the mud tank.