GN Solids Control
[email protected]
Tel:+86-316-5276989 (China)
Tel:+1-713-8780880 (USA)
Home > News
Three sets of drilling rig oil-based cuttings processing equipment go to Africa
2022-01-07 15:42:02

In the drilling cuttings processing system, it is very important to use a decanter centrifuge and a cuttings dryer. Recently, GN Solids Control produced a number of non-floating mud systems for an overseas drilling company.


Generally, the cuttings dryer is mainly used to process oil-based cuttings and composite-based cuttings. GN Solids Control cuttings dryer has 3 different sizes of screen baskets, and the minimum solid particles that can be removed are 250 microns. Under the action of high rotation and gravity, the GN Solids Control drill cuttings dryer can recover most of the oil in the cuttings. The oil content in the cuttings before processing is more than 15%, and the oil content in the final cuttings after processing can be Control it below 5%.


Decanter centrifuges are another effective drilling waste management equipment. There are still many small solid particles in the drilling mud after the cuttings dryer treatment. In order to be used in the active drilling mud system, it is necessary to use the GN Solids Control decanter centrifuge to remove solid particles larger than 2-5 microns. After the equipment shipped this time was inspected by a third party, all these decanter centrifuges and cuttings dryers were sent to the drilling site.


This is not the customer’s first order. So far, the customer has purchased nearly 20 decanter centrifuges, 20 cuttings dryers, feed pumps, screw conveyors, etc. In order to keep all drilling waste management systems working in the correct position, GN Solids Control provides a retractable bracket to facilitate the use of decanter centrifuges and drill cuttings dryers.


In addition to drilling waste treatment equipment decanter centrifuges and vertical cuttings dryers, GN Solids Control also provides sludge treatment systems for the treatment of high-density and high-solids sludge at the bottom of tanks, oil refineries and drilling rig sites. GN Solids Control always provides you with suitable solutions, customizing satisfactory solid and liquid separation solutions for you, welcome to consult.