GN Solids Control
[email protected]
Tel:+86-316-5276989 (China)
Tel:+1-713-8780880 (USA)
Home > Videos
Video:GN Decanter Centrifuge for water based drilling mud in Argentina
2015-01-24 16:13:58

GN Solids Control has already shipped over 30 decanter centrifuges and 20 high G drying shale shakers to Argentina in last 2 years.

WBM Decanter Centrifuge

Configuration of Water Based drilling cuttings handling system

Normally, for water based mud drilling cuttings,contractors will use the screw conveyor to pick up the drilling cuttings discharged from the primary solids control equipment,and transfer to the linear motion High G drying shakers GNZS594HGE-LD,the High G Drying Shaker drying the drilling cuttings, and recovering drilling fluids to the catch tank under the shale shaker. A positive displacement screw pump feed the High speed decanter centrifuge from the shaker catching tank.A GNLW363BG high speed decanter centrifuge will separate the fine solids from the drilling fluids.Contractors may also use the chemically enhanced dewatering unit to do flocculation for the ultra fine solids in the water based mud.And after dewatering,a GNLW363BG or GNLW363BG-VFD decanter centrifuge will separate the solids from the drilling fluids.

Vedio for Water based mud decanter centrifuge working in Argentina

GN High G Drying Shale Shaker Features:

  • Patent electric shale shaker deck angle adjustable while working, mechanical deck angle adjustment for backup application.
  • Patent tighten rubber sealing for shale shaker deck and screen, long life and easy replacement.
  • Shale shaker bottom deck made from Stainless Steel for long service life.
  • Heat treatment on complete shale shaker deck for High G force operation.
  • Pretensioned shale shaker screen for fast screen replacement
  • .Famous Brand Vibration Motors : IEC Ex, ATEX and UL Certified
  • Electrical components: SIEMENS, Schneider Brand
  • Flexible feeding type including Weir Feed, Top Feed, and Hopper Feed for different applications.
Agentina WBM Mud Centrifuge Drilling Mud Decanter Centrifuge

GNLW363 Water Based Mud Decanter Centrifuge Features:

GNLW363 Decanter Centrifuge is the most popular size centrifuge in the oil drilling industry. It can be used for fine/ultra fine solids separation, barite recovery and zero-discharge dewatering. With it’s removable legs, the GNLW363 Decanter Centrifuge can be used on solids control mud tank or the telescopic skid for drilling waste management. The bowl diameter of the GNLW363 Decanter Centrifuge is around 14inch (360mm) with bowl length 50inch (1270mm), 3.5 is good bowl length/diameter ration for oil drilling mud.GNLW363 Decanter Centrifuge is driven by main motor and back derive motor with High Torch Sun-Wheel Gear Box, GN have the fixed speed available with different pulley for option to change the centrifuge speed, and VFD drive with PLC control available for your different applications.